Removing From The Host Machine - Canon Perfect Binder-C1 Replacement Manual

Chapter 2

2.1.2 Removing from the Host Machine

1) Disconnect the signal cable [1] from the perfect binder.
2) Remove the rear cover.
3) Remove the shunt cable [1].
- 2 screws [2]
[1]
[2]
2-2
[1]
F-2-1
F-2-2
4) Turn the two nuts [1] in the direction of the arrow to lift up the stoppers.
0024-6639
5) Remove the two screws [1] and lift up the the main switch panel [2] after
sliding it to the rear side. Remove the connector [3], the reusable band [4],
and then remove the main switch panel.
[1]
F-2-3
[2]
[1]
[3]
F-2-4