Table of Contents
Advertisement
Chapter 2
6) Remove the four screws [1], loosen the four screws [2], and then draw out
the cover transport assembly [3].
[2]
[3]
[1]
2.1.11 Removing the Cover Horizontal Registration Unit
1) Draw out the cover transport assembly.
2) Remove the E-ring [1] and bearing [2].
[1]
2-6
[1]
[2]
F-2-19
[2]
F-2-20
3) Push the roller [1] backward, pull out the bearing [2] backward, release
the roller pulley [3] from the belt, and then remove the roller.
4) Remove the transport roller 1 unit [1].
- 2 screws [2]
5) Remove the resin retaining ring [1].
0024-6856
[1]
[2]
[3]
F-2-21
[2]
[1]
F-2-22
F-2-23
[1]
Advertisement
Table of Contents
