Chapter 2
5) Remove the E-ring [1] and the bearing [2].
[2]
[1]
6) Remove the 2 screws [1] to detach the guide mount [2]. Take out the de-
livery roller 1 [4] and the delivery roller 2 [5] after releasing the gear from
the belt [3].
[3]
[5]
2.1.44 Before replacing the spine bending harness (right)
(120,000 sets)
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
3) Remove the cover horizontal registration unit. (page 2-6)Reference[Re-
moving the Cover Horizontal Registration Unit]
2-28
[2]
F-2-121
F-2-122
2.1.45 Spine bending harness (right) (120,000 sets)
1) Remove the reuse band [1] and release the spine bending harness (right)
[2] from the 4 wire saddles [3]. Disconnect the 2 connectors [4] and then
remove the spine bending harness (right).
[1]
[2]
[1]
2.1.46 Before replacing the spine bending harness (left)
(240,000 sets)
[4]
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
2.1.47 Spine bending harness (left) (240,000 sets)
0024-6862
1) Open the transport roller 4/5 unit [1].
[2]
[4]
[1]
[3]
[3]
[3]
[4]
F-2-123
[1]
F-2-124
0024-6863
0024-6864
0024-6866