Replacement Parts In Book Stacking Assembly; Before Replacing The Drawer Connector (Male) (20,000 Times); Drawer Connector (Male) (20,000 Times); Before Replacing The Drawer Connector (Female) (20,000 Times) - Canon Perfect Binder-C1 Replacement Manual

Chapter 2

2.1.57 Replacement parts in book stacking assembly

No. Parts Name
[1] Drawer connector (male)
[2] Drawer connector (female)
2.1.58 Before replacing the drawer connector (male)
(20,000 times)
1) Unlock the stacking tray lock, and the draw out the stacking tray assem-
bly.

2.1.59 Drawer connector (male) (20,000 times)

1) Remove the two screws [1] from the left rail.
[1]
3) Remove the three screws [1] from the right rail, and then remove the
stacking tray assembly [2].
CAUTION:
During the work, hold the stacking tray assembly so that it does not fall
down.
[2]
2-32
T-2-4
Q'ty
1
1
F-2-137
[1]
F-2-138
3) Remove the drawer connector (male) [1].
- 2 stepped screws [2]
0024-6879
- 2 springs [3]
- 2 spacer nuts [4]
- 2 connectors [5]
0024-6880
[4]
[3]
0024-6882
[2]
2.1.60 Before replacing the drawer connector (female)
(20,000 times)
1) Unlock the stacking tray lock, and the draw out the stacking tray assem-
bly.
2) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]

2.1.61 Drawer connector (female) (20,000 times)

1) Remove the connector, and then remove the power supply unit 2 [1].
- 2 screws [2]
[5]
[4]
[3]
[1]
F-2-139
[2]
[1]
[2]
F-2-140
0024-6883
0024-6884