Table of Contents
Advertisement
Chapter 2
CAUTION:
When reinstalling the delivery roller 1/2 unit, position it with the pressure
arms [4] on its reverse side in the holes [5] of the spine unit. If it is difficult
to position the delivery roller 1/2 unit, turn the spine drive pulley [6]
manually to move the spine unit.
2-26
[4]
[5]
[6]
F-2-113
5) Remove the arm springs [1] and the shaft spring [2] to detach the transport
driven roller 2.
NOTE:
There is a groove on the roller shaft to slide the slit of the roller shaft mount.
Remove and install the transport driven roller sliding the groove.
2.1.42 Before replacing the delivery roller 1/delivery roller
2 (15 million sheets)
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
[1]
[2]
F-2-114
[1]
F-2-115
0024-6852
Advertisement
Table of Contents
