Transport Driven Roller 2 (Spine Bending Unit (Left)) (15 Million Sheets) - Canon Perfect Binder-C1 Replacement Manual

NOTE:
There is a groove on the roller shaft to slide the slit of the roller shaft mount.
Remove and install the transport driven roller sliding the groove.
2.1.38 Before replacing the transport driven roller 2
(Spine bending unit (left)) (15 million sheets)
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
2.1.39 Transport driven roller 2 (Spine bending unit (left))
(15 million sheets)
1) Open the transport roller 4/5 unit [1].
2) Remove the connector cover [1].
- Screw [2]
[1]
[1]
F-2-98
[1]
F-2-99
[2]
F-2-100
3) Remove the connector [1] and the three screws [2] in the rear side.
0024-6861
4) Remove the three scerws [1], and then remove the delivery roller 1/2 unit
[2].
[2]
0024-6860
[2] [2]
[1]
F-2-101
[1]
F-2-102
Chapter 2
2-23