Table of Contents
Advertisement
Chapter 2
2) Push the roller [1] backward, pull out the bearing [2] backward, release
the roller pulley [3] from the belt, and then remove the roller.
[1]
2.1.24 Before replacing the transport roller 2 (15 million
sheets)
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
2.1.25 Transport roller 2 (15 million sheets)
1) Remove the roller release lever shaft [1].
- Resin retaining ring [2]
- Bushing [3]
2-16
[2]
[3]
F-2-67
[1]
[3]
[2]
F-2-68
2) Remove the resin retaining ring [1], idle gear [2] and E-ring [3].
[1]
3) Pull out the bearing [1] towards front. Remove the E-ring [2] and slide the
gear [3] towards rear, and then remove the straight pin [4].
0024-6841
0024-6842
[4]
4) Open the transport roller 2/3 unit and remove the E-ring [1], flange [2],
timing belt [3] and pulley [4], and then remove the transport roller 2 [5]
after shifting it towards rear.
2.1.26 Before replacing the transport roller 3 (15 million
sheets)
1) Remove the rear cover. (page 2-4)Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly. (page 2-5)Reference[Drawing
out the Cover Transport Assembly]
[2]
F-2-69
[2]
[3]
F-2-70
[5]
F-2-71
[3]
[1]
[4]
[3]
[2]
[1]
0024-6843
Advertisement
Table of Contents
