Points To Note On Disassembly And Reassembly; Parts Replacement Procedure - Canon Perfect Binder-C1 Replacement Manual

2.1 Parts Replacement Procedure

2.1.1 Points to Note on Disassembly and Reassembly

Before starting disassembly/reassembly work, turn off the main switch and unplug the power cord from the wall outlet, unless you are otherwise prompted to keep
the unit running for servicing purposes.
CAUTION:
- To keep the machine running in service mode, be sure to do so with the trimming assembly stowed inside.
- Before drawing out the trimming unit, move the trimming blade rearward in the service mode (
trimming blade.
- To perform reassembly, reverse the disassembly procedures, unless otherwise noted.
0024-7278
SW1 SW2
) except when replacing the
Chapter 2
2-1