Philips HR7640/80 Recipes & Directions For Use page 12

ENGLISH
12
Filter
You can use the filter to make delicious fresh fruit
juices, cocktails or soy milk in no time. All pips
and skins will be caught in the filter.
C
1 Put the filter in the assembled blender jar.
Make sure that the grooves of the filter fit
exactly onto the ribs inside the blender
jar.
C
2 Put the ingredients in the filter.
3 Pour water or another liquid (e.g. for
cocktails) into the blender jar.
C
4 Place the lid in the sieve position.
5 Switch the appliance on. See the table for
the right speed setting.
If you have doubts about the right speed, select
the highest speed setting.
6 Switch the appliance off and remove the
blender jar from the motor unit.
C
7 Pour out the drink through the spout of
the blender jar. Do not remove the lid!
For best results, put the blender jar with the
remaining ingredients back onto the appliance
and let it run for a few more seconds. Then
pour out the rest of the drink.
Tips
Particularly when you are processing large
quantities, we advise you not to put all the
ingredients in the filter at the same time. Start
processing a small quantity, let the appliance
run for a moment, switch it off and then add
another small quantity. Always place the lid!
Repeat this procedure until you have
processed all the ingredients.
For making soy milk:
Soak soy beans for 4 hours before processing
them. You can process max. 50 g of dried soy
beans or max. 2/3 of the metal sieve of the filter
filled with soaked soy beans. Add 500 ml water
and blend until smooth.
Mill
Preparing the mill for use
Never use the mill for more than 30 seconds
without interruption.
C
1 Put the ingredients in the inverted beaker.
Process only dry ingredients. Do not fill the
beaker beyond the "MAX" indication.
C
2 Pick up the blade unit by the safety ring.
Place the blade unit in the beaker. Take care that
all grooves fit the ribs inside the beaker.