Installing Linear-Rotary Motors - LinMot PR01 Series Manual

LinMot Linear-Rotary Motors

Installing Linear-Rotary Motors

The PR01 Linear-Rotary motors have a center fit on the front side so that the rotary axis can be precisely aligned.
Due to the narrow construction of the Linear-Rotary motors, it is often not sufficient to mount them by the front bolts
alone (due to vibration or lateral loads). An additional support is then necessary.
The following sketches show examples of the various possibilities. The chapter on installation drawings contains
detailed dimensions.
NTI AG/ LinMot
E_2V94_IG_Linear_Rotary_Motors_PR01.odt
www.LinMot.com
Mounting on the front and support from the side
Mounting from the bottom. If needed use wishers
to adjust.
0185-0015-
29/79