Startup; Drive Settings - LinMot PR01 Series Manual

LinMot Linear-Rotary Motors

Startup

The linear motor and rotary motor are electrically independent units. This means that the Linear-Rotary motor can
be started up sequentially. It makes no difference which motor (linear or rotary) is started up first.

Drive settings

The various parameters for the linear motor and the rotary motor are set using the corresponding wizard in the
LinMot Talk configuration program. (Contact LinMot Support if you do not see the folder "Motors\LinMot Linear
Rotary Motor".)
The Linear-Rotary motors are located in the folder "Motors\LinMot Linear Rotary Motors". It makes no difference
whether the linear or rotary motor is configured first.
NTI AG/ LinMot
E_2V94_IG_Linear_Rotary_Motors_PR01.odt
www.LinMot.com
0185-0015-
18/79