Omron SYSMAC CS/CJ Series Programming Manual page 351

PLC Comparison Charts
Item
Interrupts I/O interrupts
Scheduled interrupts
One-shot timer inter-
rupts
Input interrupts in
counter mode
High-speed counter
interrupts
External interrupts
From Communica-
tions Board
Power-ON interrupt
Power-OFF interrupt
Interrupt response
time
PLC Setup Area
330
CJ Series CS Series
Yes (Max 2 Interrupt Yes (Max. 4 or 2
Input Units: 32 points, Interrupt Input
plus 4 points for built- Units: 32 points)
in I/O on CJIM CPU
Units) (CJ1 CPU Units
do not support I/O
interrupts.)
Yes Yes
No No
Yes (CJ1M CPU Units No
only)
Yes (CJ1M CPU Units No
only)
Yes (CJ1 CPU Units Yes
do not support exter-
nal interrupts.)
No Yes
No No
Yes Yes
0.17 ms C200H Special I/
O Unit: 1 ms
Built-in I/O on CJ1M
CPU Units: ).12 ms CJ-series I/O:
0.1 ms
No user addresses No user
(setting possible only addresses (set-
from Programming ting possible only
Device, including Pro- from Program-
gramming Console) ming Device,
including Pro-
gramming Con-
sole)
C200HX/HG/ CVM1/CV
HE Series
Yes (Max. 2 Yes (Max. 4
Interrupt Input Interrupt Input
Units: 16 Units: 32
points) points)
Yes Yes
No No
No No
No No
No No
Yes No
No Yes
No Yes
1 ms ---
Fixed DM Area No user
allocation: DM addresses (set-
6600 to ting possible
DM 6655, only from Pro-
DM 6550 to gramming
DM 6559. Device, includ-
Setting possi- ing partially
ble from Pro- from Program-
gramming ming Console)
Console.
Appendix A
CQM1H
Yes (4 built into
CPU Bus Unit)
Yes
Yes
Yes
Yes
No
No
No
No
Approx. 0.1 ms
Fixed DM Area
allocation: DM
6600 to
DM 6655. Set-
ting possible
from Program-
ming Console.