Control Unit Connections For Single Pump; Control Unit Connections For Double Pump - Kessel Aqualift F Installation Manual

Pumping station for all wastewaters (with / without sewage) for underground / sub-surface installation
Table of Contents

Advertisement

Control unit
• The control unit can be operated without needing to open
the control unit cover. However, the cover can be opened
for service work.
• Opening the cover of the control unit reduces the IP 54 ra-
ting of the control unit. It should be checked if the risk is pre-
sent that moisture or spraying water can access the open
control unit. If this is the case power should be disconnec-
ted from the control unit before opening the cover. In case
of any questions contact a licensed electrician.
9.1 Switch unit single pump system)
9.2 Switch unit double pump system)
9. Control Unit
• The setting on the motor protection switch must match the
pumps in the Aqualift F unit.
• After settings have been successfully completed, make
sure to close the control unit's cover and secure properly
which will assure the proper IP protection class that the con-
trol unit offers.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aqualift f duo

Table of Contents