Mogrf Host Software; Device Discovery - MOGlabs ARF021 Manual

4. MOGRF host software

4.1 Device discovery

The mogrf software package provides a simple user interface to
the basic behaviour of
commands, run scripts, control tables, and apply firmware updates.
Please note: It may be necessary to install a firmware update (see
Appendix B) to use the software described in this section.
Upon starting the application, a device discoverer (Figure 4.1) is
initiated. This program scans the
looking for an
ARF/XRF
subnet. Starting the application is then as simple as selecting the
device and clicking Connect. If your device is not listed, recheck
your connection and network settings.
If the network and/or firewall blocks device discovery, enter the
address of the unit in the Device address box directly.
Figure 4.1: Example of the Device discoverer window, showing that one
USB device and two networked devices were detected.
ARF/XRF devices, with the ability to issue
ports of the host computer
COM
device, and then scans the local network
17
IP