MOGlabs ARF021 Manual page 105

B.3 Upgrade via mogrffw
Magenta: Package contains an older version than currently installed.
Figure B.1: The mogrffw firmware update application connected to a unit,
showing the serial number (1), model (2) and current firmware versions (3).
Note that some values may be unavailable if the device is in "firmware up-
date mode". Ensure that the model numbers are correct before continuing.
Update packages are available from the
loaded into the application by pressing the "Select" button. The
firmware in the package is compared against the currently running
version to determine which upgrades are required (Figure B.2).
Each component of the firmware is compared against the package
version and colour coded as follows:
Green: Component matches package version and is up-to-date.
Yellow: Package contains an update which should be applied.
Installing this component will downgrade the firmware, which
may be required if firmware conflict occurs.
Red: Currently installed version conflicts with package version and
may be damaged. Installation of package version is strongly
recommended.
Click on Update all to install all detected upgrades in sequence,
otherwise individual components can be installed by clicking the
Upload option next to each item.
MOGL abs website and are
95