MOGlabs ARF021 Manual page 120

110
RESTART
STATUS
ENTRIES
LENGTH
ENTRY
HEXENTRY
APPEND
INSERT
DELETE
RAMP
TABLE,RESTART,ch[,on/off]
Enables/disables an automatic software-controlled restart of the ta-
ble upon completion. Automatically enables
begin executing upon a software or hardware trigger.
TABLE,STATUS,ch
Reports the current execution status of the table.
TABLE,ENTRIES,ch[,num]
Defines the last table entry number for the given channel. Failing to
correctly set the number of entries can result in undefined behaviour.
TABLE,ENTRIES
A synonym for
TABLE,ENTRY,ch,num[,freq,ampl,phase,duration][,flags]
Sets (or returns) the currently loaded table entry
Entry numbers start at 1 and tables can contain up to 8191 entries.
The structure of this command is detailed in §8.2.
TABLE,ENTRY,2,1,800MHz,0x1500,0x0000,10us
Example:
TABLE,HEXENTRY,ch,num
Queries the specified table entry, returning the internal hexadecimal
representation of the associated frequency, amplitude and phase.
TABLE,APPEND,ch,freq,ampl,phase,duration[,flags]
Inserts the specified entry at the end of the table and increments
TABLE,ENTRIES
the
TABLE,INSERT,ch,num,freq,ampl,phase,duration[,flags]
Insert the table entry at the specified index, shifts all subsequent
entries down, and increments the
TABLE,DELETE,ch,num
Deletes the specified table entry, shifting all subsequent entries up
and decrements the
TABLE,RAMP,ch,param,start,stop,duration,count
Creates a linear ramp in
Appendix C. Command language
counter.
TABLE,ENTRIES
TABLE,ENTRIES
counter.
param
, which is one of
REARM
. Table will then
num
of channel
counter.
FREQ AMPL PHAS
, or
ch
.
,