700-701-100-02
L
O
OGGING
N
To log on to the maintenance terminal console screen:
1
Press the
SPACEBAR
The
ENTER
type the new password (single word, no spaces, up to eight characters) on a subsequent log on.
If the system does not respond, verify that the Hardware Flow Control of the maintenance
terminal is set to NONE .
2
Type the password at the prompt or press
menu bar displays
UTU-701 and ETU-751 List 1
several times to display the Logon Password screen
Figure 12. Logon Password Screen
key is the factory default password. If you establish a different password, you must
ENTER
(Figure
13).
Figure 13. Console Screen Menu Bar
August 9, 2002
(Figure
if a password has not been customized. The console screen
System Configuration
12).
27