Table of Contents
Advertisement
700-701-100-02
Initiate the Download and Navigate the Menus
To initiate the download process, go to the DOS prompt and type: dnl.
Selectable Download Menu Options.
Table 32. ETSI Firmware User Selectable Download Menu Options
Option
PORT
SPEED
DESTINATION
(a)
FILE NAME
(a) FILE NAME can be changed by pressing the
the download setup can be aborted only by typing
key to start the download sequence.
Table 33
describes how to navigate within the ETSI Firmware Download menu.
Keystroke
PAGE UP
or
and
ESC
ENTER
Download progress messages include:
•
program size
•
download time
•
program checksum
•
line-unit response
•
time out message (posted if the line unit does not response within five seconds; when this occurs, the
download operation is aborted).
While downloading, the line or desktop unit front panel LEDs all light, then a binary count sequence indicates
progress. When downloading is complete, the unit resets.
UTU-701 and ETU-751 List 1
Description
Provides support for two communication ports:
COM1 at Hex 3F8
COM2 at HEX 2F8
Supports Standard (9600 bit/s), Medium (19.2K kbps), Fast (38.4 kbps), Faster
(57.6 kbps) and TURBO (115.2 kbps) speeds. The number of data bits is fixed at 8,
with no parity and 1 stop bit.
The destination can be set to one of the following:
LOCAL (unit connected to the maintenance terminal)
LTU (LTU unit)
NTU (NTU unit)
NTU2 (NTU2 unit, in case of point-to-multipoint download)
REGENERATOR1
REGENERATOR2
Enter the firmware download file name.
DEL
key, then typing the new file name. Once in the FILE NAME field,
CTRL
Table 33. Navigating the ETSI Firmware Download Menu
Result
PAGE DOWN
Change a setting, with the exception of the FILE NAME setting.
Move from field to field.
Abort setup and returns to the DOS prompt.
Start the download process.
August 9, 2002
Table 32
+
C
. After typing the new file name, press the
Firmware Download Utility
describes ETSI Firmware User
ENTER
63
Advertisement
Table of Contents
