Logging On; Logging Off - ADC PG-PLUS PLL-722 Manual

Logging On

L O
OGGING N
1 Press the
SPACEBAR
4800, 9600, and 38400. The Logon Password screen displays.
2 Type the default password and press
password#1
new password at a subsequent log on. Passwords are not case sensitive. The password must use at least 6
and no more than 10 characters, and the new password MUST contain at least 1 alpha, 1 numeric, and 1
special character. If the system does not respond, verify that the Hardware Flow Control of the VT-100
terminal is set to On.
L O
OGGING FF
If you must leave your VT-100 terminal unattended, it is good practice to log out until you are ready to resume
work. This prevents unauthorized persons from inadvertently changing any of your operating parameters. Log out
by choosing Logout from the PAU Main menu bar or by disconnecting the cable connecting the console to the
PAU/PMU.
10
several times to activate the Autobaud feature. Supported baud rates are 1200, 2400,
PG-Plus Login Screen
Enter Password: ____________
Access Key: 062790011146
to view the PAU or PMU Main menu bar.
ENTER
is the factory-default password. If you establish a different password, you must type the
January 6, 2003
SCP-PLL722-010-04H
PLL-722 List 1