Table of Contents
Advertisement
SCP-PLL733-010-03H
A
DMINISTRATION
Performance monitoring is built into PG-Plus application. You can access the VT-100 port of the PAU or the PMU
to review performance measurements that provide an indication of the quality of transmission to the subscriber.
You can perform system administration functions, such as alarm checking and clearing, configuration changes,
performance monitoring, and testing for the COLU through the screens.
Connect a VT-100 terminal is connected to the RS-232 interface on the front panel of either the PAU or the PMU
to access the COLU screens. If the system does not respond, verify the following values are present:
•
VT-100 terminal Hardware Flow Control is set to On
•
XON/XOFF is enabled
•
ASYNC parameters: Data = 8, Parity = None, Start/Stop = 1.
For further information on connecting a terminal and accessing the screens refer to the PAU or the PMU or the
PAU or the PMU Technical Practice.
C
U
ONVENTIONS
Some screenshots in this document come from a prototype set-up and may appear slightly different from what you
see on your Craft interface screen. The basic information and contents should be similar. This document uses the
following conventions for menus and shortcuts.
Example
menu
submenu
prompts
error
error text
n
L
O
OGGING
N
1
Press
SPACEBAR
9600, and 38400. The Logon Password screen displays.
2
Type the default password and press
PLL-733 List 1
T
D
SED IN
HIS
OCUMENT
Describes
name of menu item
name of submenu item
the place where you answer yes or no or some other response required
the name of what's wrong
an explanation of what's wrong
a variable, such as POTS unit 1 in a 6 POTS unit
several times to activate the Autobaud feature. Supported baud rates are 1200, 2400, 4800,
PG-PLUS Login Screen
Enter Password: ____________
Access Key: 062790011146
ENTER
January 6, 2003
to view the PAU or PMU Main menu bar.
Conventions Used in This Document
9
Advertisement
Table of Contents
