Navigational Methods; Logging On; Tl1 Screen Mode - ADC PG-FLEXPLUS PLL-735 Manual

SCP-PLL735-010-03H
N M
AVIGATIONAL
The following keys are used to navigate through the menus and screens:
Keypress
ENTER
or -
←
CTRL F
or -
→
CTRL G
or -
↑ CTRL T
or -
↓ CTRL V
TAB
SPACE
ESC
-
CTRL R
- keys
A Z
L O
OGGING N
The factory-default password is password#1. If you establish a different password, you must
type the new password at a subsequent log on.
Passwords are not case sensitive. The password must use at least 6 and no more than 10
characters, and MUST contain at least 1 alpha, 1 numeric, and 1 special character.
If the password has been changed and you do not know the new password, contact ADC
Technical Support (see
you a temporary password that is based on the Access Key number displayed on the Logon
screen. The Access Key changes whenever you change the password, or when you use the
temporary password, so you should be at the terminal when you contact Technical Support.
When you use the temporary password, the password previously stored in the software is set
to the factory default of password#1 and the temporary password will no longer be valid.
1. After connecting a VT-100 terminal to the PMU, press
the autobaud feature. The Login Password screen or the TL1 screen will display.
If the Login Password screen displays, skip step 2 and go directly to step 4.
2. To change from TL1 mode to screen interface mode, enter the chg-dialog; command at the TL1 prompt
and press
ENTER
approximately two to three seconds, the TL1 screen display will change to screen interface mode and the
Password screen will appear as shown in
PLL-735 Lists 1, 2 and 3
ETHODS
Effect on Menu
Moves to submenu or screen selected.
Moves left across Main menu.
Moves right across Main menu.
Moves up the submenu selection.
Moves down the submenu selection.
No effect.
No effect.
Moves up a menu level. From the Main menu,
the Logout screen is displayed.
Returns to the main menu.
Selects an underlined or highlighted menu
item.
"Technical Support" on page
. This TL1 prompt is illustrated in
Figure 9, "Login Password Screen," on page
January 6, 2003
Effect on Screen
Invokes selected response to prompt.
Moves the cursor to the left.
Moves the cursor to the right.
Moves the cursor up.
Moves the cursor down.
Moves to the next field on all other submenu
screens.
Cycle through the field options.
Returns to Main menu without accepting
changes.
The banner briefly appears and then the main
menu bar displays.
A screen entry is made.
63) while at the terminal. They will provide
on the VT-100 terminal several times to start
ENTER
Figure 7, "TL1 Screen Mode," on page 14. After
15.
13