Data Scrambling for
NVMDIMM
Data Scrambling for
DDR4
Enable ADR
Legacy ADR Mode
ADR Data Save Mode
Erase-Arm NVDIMMs
Restore NVDIMMs
Interleave NVDIMMs
Memory Topology
Memory Map
Memory RAS
Configuration
4.9.4.1 Memory Map
The Memory Map interface is the mode setting for memory. Specific parameters are shown
in the table, Memory Topology interface as shown in the following figure.
52
NVMDIMM data scrambling switch setting, option parameters are the
same as above.
DDR4 data scrambling switch settings, option parameters are:
Auto: Automatic
Enabled: Enabled
Disabled: Disabled
ADR enable switch settings, option parameters are:
Enabled: Enabled
Disabled: Disabled
The traditional ADR mode switch setting, the option parameters are the
same as above.
ADR data save mode settings, option parameters are:
Disabled: Disabled
Batterybacked DIMMs
NVDIMMs
Erase-Arm NVDIMMs switch settings, option parameters are:
Enabled: Enabled
Disabled: Disabled
Fix the NVDIMMs switch settings, the option parameters are the same
as above.
Interleaved NVDIMMs switch settings, option parameters are the same
as above.
The Memory Topology submenu displays the current in-memory details. ----
Memory Map submenu
Memory RAS Configuration Submenu
Enabled
Enabled
Enabled
Enabled
NVDIM
Enabled
Enabled
Disabled
----
----