Table of Contents
Advertisement
by "1" should be aligned with the triangle mark on the CPU socket. Tighten the screws
according to the sequence of 1, 2, 3, 4.
Notes:
● It is required to coat thermal grease evenly onto the contact position between CPU
heatsink and CPU.
● The pins of the processor socket are easily damaged. If any pins are damaged, you may
need to replace the motherboard.
6.2Memory Option
IMPORTANT:
This serverdoes not support mixing DIMMs.
All DIMMs installed in the server must be the same type.
●
DIMM slot layout is as shown in the following figure:
22
Advertisement
Table of Contents
