Table of Contents
Advertisement
4.2 UEFI/Legacy Mode Switching
Log in to the BIOS Setup interface, select the "Advanced CSM Configuration" interface,
press Enter, set the Boot Mode option, set the system startup mode (UEFI Mode/Legacy
Mode), and set the implementation method of Option ROM of Network, Storage, Video
Oprom Policy and other PCI devices accordingly as shown in the following figure.
Currently, the default setting of the platform is Legacy Mode Network, Storage, Video
Oprom Policy, and the Option ROM of Other PCI device is also set to Legacy.
If the Boot Mode is set to UEFI Mode, the implementation mode of the Option ROM of the
Network must be set to UEFI, Storage, Video Oprom Policy, and the implementation mode
of the Option ROM of Other PCI device is recommended to be set to UEFI, which can also
set to Legacy if there are special requirements. Compared with legacy mode, UEFI mode
has many advantages, supporting booting from GPT format hard drive larger than 2.2T,
PXE booting of IPv6/IPv4 network, and providing UEFI Shell environment. This item can be
customized according to customer needs.
4.3 View System Information
Log in to the BIOS Setup interface, and "Main" screen will display the information summary
BIOS Setup
15
Advertisement
Table of Contents
