Iio Configuration - Inspur OB5161M5 User Manual

Table of Contents

Advertisement

Description Table of Memory RAS Configuration Interface
Interface parameter Function Description
Static virtual lockstep mode switch settings, option parameters are:
Static Virtual Lockstep
Enabled: Enabled
Mode
Disabled: Disabled
Mirror mode settings, option parameters are:
Disabled
Mirror Mode
Mirror Mode 1LM
Mirror Mode 2LM
Mirror TAD0 mode switch settings, option parameters are:
Mirror TAD0
Enabled: Enabled
Disabled: Disabled
Enable partial mirror mode, the option parameters are:
Disabled
Enable Partial Mirror
Partial Mirror mode 1LM
Partial Mirror mode 2LM
UEFI ARM mirror mode switch settings, option parameters are:
UEFI ARM Mirror
Enabled: Enabled
Disabled: Disabled
Memory Rank hot standby switch settings, option parameters are:
Enabled: Enabled
Disabled: Disabled
Memory Rank
When it is set to Enabled, you can select the memory hot backup mode.
Sparing
It is a backup in the memory channel of Rank. The total memory capacity
varies according to the choice of the hot standby mode. Half of the
memory capacity in the maximum supported channel is used for hot
standby.
Correctable Error
Correctable error threshold setting
Threshold
SDDC+1 switch settings, option parameters are:
SDDC Plus One
Enabled: Enabled
Disabled: Disabled
ADDDC hot standby switch settings, option parameters are:
ADDDC Sparing
Enabled: Enabled
Disabled: Disabled
Set the NGN Die hot standby switch settings, and option parameters are:
Set NGN Die Sparing
Enabled: Enabled
Disabled: Disabled
NGN Die Sparing
NGN Die hot standby setting, the option value range is 0~255, 0 means
Aggressiveness
Die has no hot standby.
Patrol Scrub Switch settings, option parameters:
Patrol Scrub
Enabled: Enabled
Disabled: Disabled
Patrol Scrub Interval Patrol Scrub interval setting, the unit is hour, the range is 0~24
Patrol Scrub address mode settings, option parameters are:
Patrol Scrub Address
System Physical Address
Mode
Reverse Address

4.9.5 IIO Configuration

IIO Configuration interface is for configuring the PCIe slot. Specific parameters are shown in
54
Defaults
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
2
Disabled
Disabled
Enabled
128
Enabled
24
System
Physical
Address

Advertisement

Table of Contents
loading

Table of Contents