Table of Contents
Advertisement
Description Table of Add User Interface
Interface parameter Function Description
User Name
User name setting, up to 16 characters.
User password setting, password characters must contain at least 8
User Password
characters and a maximum of 20 characters including uppercase and
lowercase letters, special characters and numbers.
Channel NO
BMC channel setting, enter 1 or 8
User permission settings, option parameters are:
Reserved
Callback
User
User Privilege Limit
Operator
Administrator
After the setting is successful, "Set User Access Command Passed" will
be prompted, and the BMC User will take effect immediately.
Note:
when enabling added user to enable, you need to go to the Change User settings
interface, set the User item to [Enabled] to log in to the BMC Web interface.
4.10.2.2 Delete User
The Delete User interface is used to delete the BMC user through the BIOS. The deletion
will take effect immediately after the deletion, and then user will not be able to log in to the
BMC Web interface. The specific parameter description is shown in the table, Delete User
interface is shown in the figure.
BIOS Setup
Defaults
----
----
----
Reserved
67
Advertisement
Table of Contents
