Nikon Epiphot 300 Manual page 60

Inverted metallurgical mocroscope
Table of Contents

Advertisement

(j) F ocus on the sample.
® Set EXP. ADJ (exposure adjustment) value
® Set lamp intensity.
Check exposure time.
@ Touch the EXP key.
The shutter opens and closes. (Exposure)
Large format film
® Advance film
To©
·· · · · (See page 59)
····· touch the EXP. ADJ keys to shift the LED in
·· · · · microscope. (See page 60)
. . . . . ND filters to set the exposure time within the
. . . . . The remaining exposure time is counted down.
35 mm film
Film advances
..... (See page 61)
one frame
End of film role
(See "Film Rewinding"
on page 49)
Film end LED above
the WIND key blinks
..... Touch the RST key to reset the locked shutter.
The shutter locks
D
D
Manual
Confirm
Rotate the fine focus knob of the microscope.
Normally, set this value at "O". If necessary,
+ or - direction. (See page 57)
Rotate the lamp intensity control dial of the
• For the color films adjust the brightness with
specified range.
• For B/W films, change lamp intensity to
arbitrarily set the exposure time.
Touch the EXP key of the control box or
depress the hand-held switch. (See page 61)
c:J
Automatic
54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents