Nikon Epiphot 300 Manual page 21

• Lamp and Lamphouse
Insert the lamp firmly into the socket pinholes
[I] . Fit the socket sleeve into the lamphouse
� , and clamp the sleeve with the socket
sleeve clamp screw � .
Sufficiently loosen the lamphouse clamp
screw, insert the lamphouse into the adapter,
and fix the lamphouse with the clamp screw.
13
*
Use of the Metal Halide Light Source
Insert the end of the fiber into the fiber adapter
until it reaches the limit. Fix this end of the fiber
with the clamp screw supplied with the fiber
adapter.
�
Do not apply excessive force to the clamp
screws.
Insert the fiber-attached fiber adapter into the
sleeve in the back of the microscope. Fix the
a dapter with the clamp screw supplied with the
sleeve.
Refer to the instruction manual of the metal
halide light source on the assembly and use of
this light source.
Clamp screw