Nikon Epiphot 300 Manual page 56

(2) Film Rewinding
G) When the film end LED starts blinking, depress (for FX-35DX dark box) or slide
(for NFX-35 dark box) the rewind switch of the dark box [II. It is not necessary to
keep depressing or sliding the switch.
• Do not touch the rewind switch until photomicrography is completed. If
touched, double exposure may result.
0 Raise the rewind crank. Turn the crank in arrow direction to rewind the film �-
• The film advance indicator rotates in reverse direction when the film is being
rewinded.
• The slight tension felt near the film end is the sign that the film is released from
the spool. Turn the crank a little further until the film advance indicator stops
rotating. Now the film is rewound completely.
G) Pull the rewind knob to open the rear cover and unload the film cartridge.
• Unload the film cartridg<None>e in a place with no direct sunlight. Do not leave
the unloaded film cartridge in a bright place. Have it developed as soon as
possible.
• Do not open the dark box until the film has been rewound completely.
© Touch the RST (reset) key of the control box to turn off the film end LED and to
reset the shutter lock.
49
FX-35DX NFX-35