4. Connect the drive unit suction tube with the cap blade unit suction tube.
5. Install the return lever spring on the bottom surface of the drive unit.
6-7-3 Drive Unit Line Wiring
1: Install the speaker Ass'y and the waste ink absorber before assembling the drive unit. Face the
speaker ass'y terminal on the right side.
2: Attach the speaker unit connection of the drive belt.
Fig.Part 1-62 Suction Tube Connection
Fig.Part 1-63 Assembly of Return Lever Spring
Fig.Part 1-64 Speaker Unit cable wiring
Part 1 - 99