Assembly/Disassembly Of Cap Blade Unit - Canon JX500 Service Manual
Hide thumbs
Also See for JX500:
- User manual (336 pages) ,
- Manual (12 pages) ,
- Easy setup instructions (2 pages)
Table of Contents
Advertisement
6-8 Assembly/Disassembly of Cap Blade Unit
6-8-1 Disassembly of Cap Blade Unit
1. Remove the tape securing the suction tube to the main unit. Remove the suction tube
securing to the main unit slits.
2. Remove the cap slide spring from the cap blade unit bottom surface (1). Move the cap blade
unit rightward. Pull up two cap blade unit pawls with a driver or an equivalent (2). Pull the
cap blade unit upward (3).
Fig.Part 1-66 Handling Suction Tube
Fig.Part 1-67 Disassembly of Cap Blade Unit
Part 1 - 101
Advertisement
Table of Contents
