1-3 ROM Version-up with USB connection
The following is the ROM version-up procedure.
1-3-1 Necessary Staffs
Computer (OS: Windows 2000 or Windows XP)
Version-up application:
ROM Ver-Up Board With Cable
USB connector
Version-up file: "****.mot"
1-3-2 Preliminary Preparation
Copy the necessary software. Plug this machine to the computer.
1-3-3 Connection with Computer
1. Remove the two screws on the reverse side of the main unit. Remove the Rear Cover.
USBTools.exe
Attach an insulating tape on the terminal before using ROM Ver-Up
Board With Cable.
This prevents from causing short circuit.
Fig.Part 2-3 Disassembly of the Rear Cover