Bluetooth; Rf Control Signals; Parallel Display - Digi ConnectCore 6UL Hardware Reference Manual

About the ConnectCore® 6UL

Bluetooth

The ConnectCore 6UL module supports both Bluetooth and Bluetooth Low Energy protocols:
Bluetooth 4.2; backwards compatible with Bluetooth 1.X, 2.X + Enhanced Data Rate, Bluetooth
n
3.X, Bluetooth 4.0 and Bluetooth 4.1. Bluetooth class 1 and class 2 power-level transmissions
Integrated WLAN-Bluetooth coexistence
n
See Bluetooth certification

RF control signals

The following signals are not supported by the current firmware of the WLAN/Bluetooth transceiver:
WLAN_RF_KILL# (pad B17)
n
BT_RF_KILL# (pad B18)
n
WLAN_LED (pad B19)
n
BT_LED (pad B20)
n

Parallel display

The ConnectCore 6UL provides a 24-bit RGB LCD interface. The following table shows the color
mapping of this interface when configured to work in 16/18/24 bits.
Signal name Description
LCD_DATA0 Display data line 0
LCD_DATA1 Display data line 1
LCD_DATA2 Display data line 2
LCD_DATA3 Display data line 3
LCD_DATA4 Display data line 4
LCD_DATA5 Display data line 5
LCD_DATA6 Display data line 6
LCD_DATA7 Display data line 7
LCD_DATA8 Display data line 8
LCD_DATA9 Display data line 9
LCD_DATA10 Display data line 10
LCD_DATA11 Display data line 11
LCD_DATA12 Display data line 12
LCD_DATA13 Display data line 13
LCD_DATA14 Display data line 14
ConnectCore® 6UL Hardware Reference Manual
for more information.
16-bit 18-bit 24-bit
B[0] B[0]
B[1] B[1]
B[2] B[2]
B[3] B[3]
B[4] B[4]
G[0] B[5]
G[1] G[0]
G[2] G[1]
G[3] G[2]
G[4] G[3]
G[5] G[4]
R[0] G[5]
R[1] R[0]
R[2] R[1]
R[3] R[2]
B[0]
B[1]
B[2]
B[3]
B[4]
B[5]
B[6]
B[7]
G[0]
G[1]
G[2]
G[3]
G[4]
G[5]
G[6]
Parallel display
25