Feature [1][1]: Reverse Modem Port Selection - Black Box ASD-4 Manual

5.3.12 F [1][1]: R
EATURE
This feature defines where the ASD-4 will route a call with a reverse modem
signal. (See Sections 4.2.7.C and 5.3.8 for more information.) The ASD-4 can
automatically route these calls to either the FAX or MODEM port. The
Reverse Modem Port Selection is factory-preset for the MODEM port,
[1] [1][1] [*].
Example: To set the Reverse Modem Port Selection to transfer calls to the
FAX port, enter the programming mode and press the following on your tone
phone:
[0] Set to FAX port
[1][1] Reverse Modem Port Selection
[*] End programming sequence (3 beeps indicate correct entry)
.
. (Optional entries for additional changes)
.
[*] Save changes and exit programming
M P
EVERSE ODEM ORT
CHAPTER 5: Programming the ASD-4
S
ELECTION
49