Installing The Asd-4 On A Two-Line System; One Single-Line Phone On The Asd-4'S Line; One Two-Line Phone On The Asd-4'S Line - Black Box ASD-4 Manual

Red
Phone
Line's
Junction
Box
Phone
Cable from
LINE-IN
Port to
Wall Jack
"Number 1"
Figure 3-5. The ASD-4 installed as an extension (maintaining

3.6 Installing the ASD-4 on a Two-Line System

This arrangement typically occurs in homes with a primary line (residence
number) and a private business line (home-business number). Three sub-
configurations are dealt with in the next three sections:
1. There will be one single-line phone on the same line as the ASD-4.
2. There will be one two-line phone on the same line as the ASD-4.
3. There will be two or more phones on the same line as the ASD-4.
3.6.1 O S
NE INGLE
Use the single-line installation procedure described in Section 3.3.
3.6.2 O T -L
NE WO
For this procedure, you will need two three-way adapters, and maybe an extra
phone cable or two. The adapters can be purchased from any telephone or
electronic-equipment dealer. See Figure 3-6 on the next page for a close-up of
a three-way adapter.
Black
Yellow
Red
Green
-L P
INE HONE ON THE
P
INE HONE ON THE
Green
Phone Cable from
PHONE Port to
Wall Jack "Number 2"
exclusion).
ASD-4' L
S INE
ASD-4' L
S INE
CHAPTER 3: Installation
13