Table of Contents
Advertisement
Example: To turn the Automatic Ring Reduction feature OFF, enter the
programming mode and press the following on your tone phone:
[0] Turn OFF
[0] Automatic Ring Reduction
[*] End programming sequence (3 beeps indicate correct entry)
.
.
(Optional entries for additional changes)
.
[*] Save changes and exit programming
5.3.2 F
[1]: O
EATURE
If you pick up a phone connected to the TAD or PHONE port and hear a
busy tone, a device on either the FAX or MODEM port is on the line, so hang
up the phone. If OLN is ON, the ASD-4 will send a short ring to all the phone
devices directly or indirectly attached to the TAD and PHONE ports when the
device on the FAX or MODEM port releases the line. This tells you that you
now have an open telephone line to make a call.
The ASD-4 will not ring extension phones for OLN unless exclusion is
maintained (see Section 3.5).
The OLN feature is factory-preset OFF, [0] [1] [*].
Example: To turn the OLN feature ON, enter the programming mode and
press the following on your tone phone:
[1] Turn ON
[1] Open Line Notification
[*] End programming sequence (3 beeps indicate correct entry)
.
.
(Optional entries for additional changes)
.
[*] Save changes and exit programming
L
N
PEN
INE
OTIFICATION
NOTE
CHAPTER 5: Programming the ASD-4
(OLN)
43
Advertisement
Table of Contents
