Function [2][3]: Modem Access Code - Black Box ASD-4 Manual

ASD-4
5.4.2 F [2][2]: FAX A
UNCTION
This function allows you to define the FAX port's access code. When you or a
caller enter this code on the keypad of a tone phone, the ASD-4 transfers the
call to the FAX port. The FAX Access Code is factory-preset to [1] [1] (the
program entry would be [2][2] [1] [1] [*]). This code can be from one to
four digits long.
Example: To change the FAX Access Code to [4] [3] [2] [1], enter the
programming mode and press the following on your tone phone:
[2][2] Change FAX Access Code to
[4] [3] [2] [1] The desired access code
[*] End programming sequence (3 beeps indicate correct entry)
.
. (Optional entries for additional changes)
.
[*] Save changes and exit programming
Do not program similar access codes into the Security Access Code,
FAX Access Code, and MODEM Access Code. Also, do not use [0] as the
first digit in any access code, because this will confuse the ASD-4 and
will interfere with other operations.
5.4.3 F [2][3]: MODEM A
UNCTION
This function allows you to define the MODEM port's access code. When you
or a caller enter this code on the keypad of a tone phone, the ASD-4 transfers
the call to the MODEM port. The MODEM Access Code is factory-preset to
[2] [2] [*] (the program entry would be [2][3] [2] [2] [*]). This code can be
from one to four digits long.
Example: To change the MODEM Access Code to [6] [7] [8] [9], enter the
programming mode and press the following on your tone phone:
[2][3] Change MODEM Access Code to
[6] [7] [8] [9] The desired access code
[*] End programming sequence (3 beeps indicate correct entry)
.
. (Optional entries for additional changes)
.
[*] Save changes and exit programming
52
C
CCESS ODE
NOTE
C
CCESS ODE