Table of Contents
Advertisement
ASD-4
5.3.3 F
[2]: E
EATURE
This feature allows the ASD-4 to detect when an extension phone not
attached to the ASD-4's TAD or PHONE port answers a call that is actively
ringing the TAD and PHONE ports. When the ASD-4 detects the extension
phone going off-hook, it releases the call to the extension phone and stops
ringing the TAD and PHONE ports. The Extension Detection feature is
factory-preset ON, [1] [2] [*].
Example: To turn the Extension Detection feature OFF, enter the
programming mode and press the following on your tone phone:
[0] Turn OFF
[2] Extension Detection
[*] End programming sequence (3 beeps indicate correct entry)
.
.
(Optional entries for additional changes)
.
[*] Save changes and exit programming
5.3.4 F
[3]: A
EATURE
This feature is designed for use with a TAD to ensure that faxes that do not
produce CNG tones, or that rotary/pulse-dial, can access the FAX or MODEM
port.
When the ASD-4 routes a call to the TAD port and the TAD answers it, the
ASD-4 scans function [6], the Automatic TAD Transfer Timer. If the amount
of time that the TAD remains on line is less than the value of the Automatic
TAD Transfer Timer, the ASD-4 will automatically transfer the call to the FAX
or MODEM port, depending on the setting of feature [1][2], Automatic
Transfer Port Selection.
The Automatic TAD Transfer feature is factory-preset OFF, [0] [3] [*].
Example: To turn the Automatic TAD Transfer feature ON, enter the
programming mode and press the following on your tone phone:
[1] Turn ON
[3] Automatic TAD Transfer
[*] End programming sequence (3 beeps indicate correct entry)
.
.
(Optional entries for additional changes)
.
[*] Save changes and exit programming
44
D
XTENSION
ETECTION
TAD T
UTOMATIC
RANSFER
Advertisement
Table of Contents
