Table of Contents
Advertisement
ASD-4
5.3.13 F
[1][2]: A
EATURE
This feature determines where the Automatic TAD Transfer feature (feature
number [3]) and the Automatic No Answer Transfer feature (feature number
[5]) route an incoming call.
If the Automatic Transfer Port Selection is set to [1] (MODEM), the
Automatic TAD Transfer feature and the Automatic No Answer Transfer
feature will route calls to the ASD-4's MODEM port. If the Automatic Transfer
Port Selection is set to [0] (FAX), the Automatic TAD Transfer feature and
the Automatic No Answer Transfer feature will route calls to the FAX port.
The Automatic Transfer Port Selection is factory preset to the FAX port, [0]
[1][2] [*].
Example: To set the Automatic Transfer Port Selection feature to route calls
to the MODEM port, enter the programming mode and press the following
on your tone phone:
[1] Set to MODEM port
[1][2] Automatic Transfer Port Selection
[*] End programming sequence (3 beeps indicate correct entry)
.
.
(Optional entries for additional changes)
.
[*] Save changes and exit programming
50
T
UTOMATIC
RANSFER
P
S
ORT
ELECTION
Advertisement
Table of Contents
