Connecting The Data Port - Black Box FX6306NA User Manual

PLUG AND PLAY PHONE LINE MANAGER XL
to either Phone Line Manager unit. Networking two 4 x 12 units together by
this method will effectively create a 6 line x 22 IST port Phone Line Manager.
Networking two 8 x 24 Phone Line Managers together will create a 14 x 46
Phone Line Manager, and networking three 8 x 24 Phone Line Managers
together will create a 21 x 69 Phone Line Manager.
Link
4 x 12 Phone Line Manager (1st)
4 x 12 Phone Line Manager (2nd)
4 x 12 LineShare (1st) 4 x 12 LineShare (2nd)
11 IST
11 IST
3 Telephone
3 Telephone
Devices
Devices
Link
Lines
Lines
Figure 3-2. 6 x 22 Networked Application.
In the above example, IST devices on the first and the second Phone Line
Manager will have equal outbound access to the three telephone lines on
their own Phone Line Manager. The fourth outbound call will be networked
to the other Phone Line Manager and have access to those three telephone
lines over the network link that is provided. For inbound calls, the three
telephone lines on each Phone Line Manager will ring the direct connect IST
ports (2-4) on the same Phone Line Manager. All other IST ports (except
network links) are for outbound calling only.

3.2 Connecting the Data Port

The RJ-11 jacks on the back panel labeled DATA are for field service and
diagnostic use only, and should be left unconnected in the Plug and Play
Phone Line Manager XL setup.
16