Feature [9]: Distinctive Ring Detection; Feature [1][0]: Outbound Voice Exclusion - Black Box ASD-4 Manual

ASD-4
5.3.10 F [9]: D
EATURE
This feature determines whether or not the ASD-4 automatically routes calls
using the phone company's Distinctive Ring Service. This feature depends on
the Distinctive Ring Assignment functions in Sections 5.4.4 through 5.4.6. For
more details about operating the ASD-4 in this mode, see Section 4.3.
Distinctive Ring Detection is factory-preset ON, [1] [9] [*].
Example: To turn OFF Distinctive Ring Detection, enter the programming
mode and press the following on your tone phone:
[0] Turn OFF
[9] Distinctive Ring Detection
[*] End programming sequence (3 beeps indicate correct entry)
.
. (Optional entries for additional changes)
.
[*] Save changes and exit programming
5.3.11 F [1][0]: O
EATURE
This feature prevents a device connected to the TAD, PHONE, FAX, or
MODEM ports from interrupting a telephone device that is in use on an
extension not directly connected to the ASD-4. If a device connected to the
ASD-4 goes off hook while an outbound extension call is active, the device
receives a busy tone, indicating that the line is in use.
To disable the ASD-4 from ringing or allowing any port device on-line, press
the [*] key any time during the call from the extension.
The Outbound Voice Exclusion feature is factory-preset ON, [1] [1][0] [*].
Example: To turn the Outbound Voice Exclusion feature OFF, enter the
programming mode and press the following on your tone phone:
[0] Turn OFF
[1][0] Outbound Voice Exclusion
[*] End programming sequence (3 beeps indicate correct entry)
.
. (Optional entries for additional changes)
.
[*] Save changes and exit programming
48
R D
ISTINCTIVE ING
V
UTBOUND OICE
ETECTION
E
XCLUSION