Table of Contents
Advertisement
Appendix B: Programming Worksheet
When you program the ASD-4, each time you press a key on your phone to
enter a programming tone, you have only six seconds to enter the next tone:
If you don't enter the next tone within six seconds, the ASD-4 will exit the
programming mode without saving your changes. For this reason, we
recommend that you write down your programming changes so that you can
read them off when you enter them rather than trying to work from memory.
Refer to Section 5.2 for each feature or function's possible values.
Make copies of this appendix and compose your changes on them. Check
off, circle, or write in (as directed) each key sequence you will use. Then go
through and copy all of them onto the lines at the bottom of page 74.
(put a check mark on the line at left if you're going
_______ [9] [9] [9] [*]
_______ [0] or [1]
(circle one)
_______ [0] or [1]
(circle one)
_______ [0] or [1]
(circle one)
ACCESS PROGRAMMING MODE
Locally:
or
[#] [*]
PROGRAM ENTRIES
to program the given feature or function)
[0] [*]
[1] [*]
[2] [*]
APPENDIX B: Programming Worksheet
(circle one)
Remotely:
[ ] [ ] [ ] [ ]
(write in your Security Access Code)
Reset to Factory Settings
(must precede any other change)
Automatic Ring Reduction
Open Line Notification
Extension Detection
71
Advertisement
Table of Contents
