Appendix A: Quick Start Guide; Installing The Asd-4 - Black Box ASD-4 Manual

Appendix A: Quick Start Guide

This Guide shows you the basics of how to install and operate the ASD-4 in a
single-line, single-phone system. Please refer to Chapters 3 through 5 of this
manual for more information on this and other system configurations.
❶
SINGLE
TELEPHONE
LINE
❷
ANSWERING
MACHINE
A.1 Installing the ASD-4
❶
Connect the incoming telephone line to the leftmost RJ-11 port (labeled
"LINE-IN") on the ASD-4's rear panel.
❷
Connect your answering machine to the second-from-left ("TAD") port.
❸
Connect your phone to the middle ("PHONE") port.
❹
Connect your fax or fax/modem to the second-from-right ("FAX") port.
❺
Connect your modem to the rightmost ("MODEM") RJ-11 port, and set the
modem to auto-answer on the first ring.
❻
Plug the cord of the ASD-4's power supply into the jack labeled "12 VAC."
Plug the power supply's transformer into a wall outlet.
ASD-4
FAX MACHINE
or FAX/MODEM
CARD
❸
TELEPHONE
APPENDIX A: Quick Start Guide
❻
POWER
SUPPLY
❹
❺
MODEM or
MODEM CARD
PC
67