Hb4599 - LEGRAND 3440 Technical Sheet

Shutter control RF
Description
Radio control device for the control of one actuator or of one group of actuators for the
control of motorized rolling shutters or shutters. It has a STOP/PRESET pushbutton to
stop the movement of the rolling shutter/shutter, and to move it to a preset position.
Technical data
Power supply:
Duration of the batteries:
Operating temperature:
Technology:
Capacity:
Dimensional data
Size: 2 modules
Configuration
"Push and Learn" self-learning type.
If the device is integrated in the BUS Automation system using the Gateway SCS/
Zigbee interface it will be possible to manage 2 relay actuator, which address must be
configured by connecting the configurators to the A, PL, and M housings as indicated:
A = Room
PL = Light Point
M = operating mode (see below)
Configurator in M Function
Press and immediately release UP and DOWN
 keys to rise or lower the rolling shutter; to stop
the movement press the STOP key.
Press and hold down the UP or DOWN keys to
send the command to rise or lower the rolling
 M
shutter; to stop the movement release the
pushbutton.
Configuration
Select the operating mode
The device may operate in two different modes:
- Bistable (to operate the rolling shutter press and immediately release the UP or
DOWN keys).
- Monostable (to operate the rolling shutter press and hold down the UP or DOWN
keys).
The device is supplied configured in bistable mode. It will be possible to change the
operating mode at any time by pressing and holding down for more than 4 seconds
both the UP and DOWN pushbuttons at the same time.
No. 1 lithium battery 3 V, CR2032 type
5 years
5 – 45 °C
Radio 2.4 GHz standard ZigBee®
150 m free field, 15 m in rooms with
concrete walls
MQ00409-c-EN
078428
0672 64 079128
Front view
1
9
8
7
PL
A
2
1
8
M
Legend
1. LEARNING key
2. NETWORK key
3. UP key
4. Configurator socket (A,PL)
5. DOWN key
6. NETWORK LED
7. LEARNING LED
8. STOP/PRESET key. Stops the rolling shutter during its movement. If pressed when
the rolling shutter is stopped, it activates its movement to a preset position, saved
in the Shutter actuator H/LN4595.
9. Configurator socket (M)
24/09/2013
663097 HA/HB4599
665111 L/N4599N
2 3
4
5
6
4
3
6
7
5
9
> 4 sec.
37