Table of Contents
Advertisement
Switch control RF 2 gangs
Description
Radio control device for the control of two separate or two groups of ON/OFF or Dimmer
type actuators.
When controlling Dimmer actuators, it will only possible to switch the load on/off, but
not to adjust the power level (dimmer function).
Technical data
Power supply:
Duration of the batteries:
Operating temperature:
Technology:
Capacity:
Dimensional data
Size:
2 modules
Configuration
Radio system: "Push and Learn" self-learning type.
Wire system: If the device is integrated in the BUS Automation system using the
Gateway SCS/Zigbee interface it will be possible to manage BUS actuators, which
address must be configured by connecting the configurators to the A, PL1, PL2, and M
housings as indicated.
A = Room
PL1 = Light Point N°1
PL2 = Light Point N°2
M = Operating mode (see table)
Configurator in M
Function
0
Cyclical ON/OFF
1
ON timed - 1 minute
2
ON timed - 2 minutes
3
ON timed - 3 minutes
4
ON timed - 4 minutes
5
ON timed - 5 minutes
6
ON timed - 15 minutes
7
ON timed - 30 minutes
8
ON timed - 500 ms
O/I
Cyclical ON/OFF
OFF
OFF control
ON
ON control
PUL
Monostable ON/OFF control (key)
No. 1 lithium battery 3 V, CR2032 type
5 years
5 – 45 °C
Radio 2.4 GHz standard ZigBee®
150 m free field, 15 m in rooms with
concrete walls
MQ00407-c-EN
078444
079144
Front view
1
8
7
6
PL1
A
2
1
7
M
PL2
Legend
1. LEARNING key
2. NETWORK key
3. Configurator socket (A, PL1)
4. ON/OFF key No. 2
5. NETWORK LED
6. LEARNING LED
7. ON/OFF key No. 1
8. Configurator socket (PL2, M)
24/09/2013
665102
HA/HB4597
0672 36
L/N4597N
2
3
4
5
3
5
6
4
8
35
- Quick Links:
- Table of Contents
- Hs4578
- Mh200N
Hide quick links:
Advertisement
Table of Contents
