L4652/2 - LEGRAND 3440 Technical Sheet

Basic control for
2 independent loads
Description
Two-module flush-mounted control equipped with four buttons and a two-colour LED.
The LEDs can be controlled/switched off with the button on the control. The device can
drive a single actuator for single or double loads or two actuators for single loads or for
independent double loads.
The device can be installed in a My Home system and use the physical or virtual con-
figuration, or as a component of the Lighting Management system and use the specific
configuration types (Plug&go, Push&Learn, Project&Download).
Technical data
Power supply via SCS BUS:
Operating power supply with BUS SCS:
Current draw at maximum LED brightness:
Dimensions
Overall size: 2 flush-mounted modules
Configuring My Home
The device can be configured in two ways:
- PHYSICAL CONFIGURATION, inserting the configurators in position.
- Configuration via the MYHOME_Suite software package, downloadable from www.
homesystems-legrandgroup.com: this mode has the advantage of offering many
more options than the physical configuration.
For a list of the procedures and their meanings, please refer to the instructions in this
sheet and to the "Function Descriptions" help section in the MYHOME_Suite software
package.
List of Functions
The device performs the following functions:
1. LIGHT SWITCH
2. AUTOMATION CONTROL
3. PROGRAMMED SCENARIO ACTIVATION
4. PLUS PROGRAMMED SCENARIO ACTIVATION
See the following pages for the configuration procedures.
27 Vdc
18 – 27 Vdc
6 mA for H4652/2
8.5 mA for L4652/2,
AM5832/2 and 067552
MQ00286-d-EN
5
A1
PL1
M1
A2
PL2
M2
Legend
1. LED
2. Top buttons
3. Bottom buttons
4. LED
5. LED control/off button
6. Configurator seat (note that this must only be used in My Home systems with the
physical configuration)
BUS
7.
LED Adjustment
DEFAULT
PUSH t > 2 s
20/01/2014
067552 H4652/2
L4652/2 AM5832/2
1
2
3
4
6
7
30%
60% 0%
100%
138