Ln4590 - LEGRAND 3440 Technical Sheet

Switch without neutral 400W
with LEDS status
Description
Actuator for the control of loads with maximum power 400 W, with ON/OFF LED.
For the connection of the device to the load and to the electric system no neutral
conductor is required.
Technical data
Power supply:
Operating temperature:
Technology:
Capacity:
Power/absorption of the loads driven:
Incandescent
Voltage Halogen lamp
lamp
Voltage
400 W
Max.
230 Vac
60 W
Min.
200 W
Max.
110 Vac
60 W
Min.
Dimensional data
Size: 2 flush mounted modules
Configuration
"Push and Learn" self-learning type.
Wiring diagram
L
100 – 240 Vac 50/60 Hz
5 – 45 °C
Radio 2.4 GHz standard ZigBee®
150 m free field, 15 m in rooms with
concrete walls
see following table
Ferromagnetic Electronic
transformer transformer
400 W 400 VA 400 VA
60 W 60 VA 60 VA
200 W 200 VA 200 VA
60 W 60 VA 60 VA
MQ00400-c-EN
663088
665103
Front view
6
Legend
1. NETWORK key
2. NETWORK LED
3. LEARNING LED
4. ON/OFF key
5. Load ON/OFF LED
6. LEARNING key
Important:
– Connect a load before performing any "scenario" learning
procedure.
– For conventional type transformers, a load with power 60%
higher than their rated power must be connected.
– For the calculation of the controllable power take into account
the efficiency of standard transformers (e.g.: transformer for a 50
W lamp with an efficiency of 0.78 => power actually absorbed
by the transformer = 64 VA)
24/09/2013
H4590
0672 31

LN4590

1
2
3
4
5
25