Ln4671M2 - LEGRAND 3440 Technical Sheet

Control/actuator
Description
This device, with 4 pushbuttons and 4 two-colour LEDs at the front, is fitted with 2 inde-
pendent relays to control:
- 2 loads or 2 groups of loads that are independent;
- 1 single load (rolling shutter motor).
The actuator may also be configured for the management of the connected load, whilst
at the same time operating as a "control device" for the management of one or more
remote actuators, with operating modes typical of a 2-module basic control.
More specifically, after the configuration, it is possible to set the following modes of
operation:
1. Actuator for single load (lighting or shutter automation) with local control.
2. Actuator for 2 independent loads (lighting) with 2 local controls.
3. Actuator for 1 load (lighting) with local control by the left button and remote actuator
or scenario control by the right button.
4. Actuator for 1 load (shutter automation) with local control by the left button and re-
mote actuator or scenario control by the right button.
Technical data
Power supply from BUS:
Operating power supply with SCS BUS:
Power consumption on standby:
Operating temperature:
Operating temperature:
Power/consumption of driven loads:
Incandescent lamps - Geared motors for rolling
Halogen lamps
230 Vac 460 W 2 A 460 W
Linear fluorescent lamps - Electronic transformers
70 W
27 Vdc
18 – 27 Vdc
14 mA max
0 – 40°C
(-5) – (+45) °C
LED lamps
Compact fluorescent lamps
shutters
2 A 70 W Max. 2 lamps
Ferromagnetic transformers
0,3 A 2 A cosφ 0,5 460 VA
MQ00411-e-EN
Front
4
Rear
7
Legend
LED:
1.
LIVING LIGHT: green with motor stopped, or orange (green + red) with motor in
operation
green with light OFF, and orange with light ON
AXOLUTE: blue with motor stopped, or blue + red with motor in operation
blue with light OFF, or blue + red with light ON
Top buttons
2.
Bottom buttons
3.
LED control/off button
4.
Configurator socket (note that this must only be used in My Home systems with the
5.
physical configuration)
BUS
6.
Clamps (3 x 2.5 mm ) for connection to the load
7. 2
Dimensions
Size: 2 flush-mounted modules
19/06/2014
067556 AM5851M2
H4671M2

LN4671M2

1
2
3
1
5
6
183