2.8
Ordering data
Ordering data of the components
SINUMERIK 828D is generally marketed in sales packages with drives, motors and
accessories. For orders, please contact your local Siemens sales representative.
Table 2-1
Designation
Panel Processing Unit without system software
● PPU 241.3 BASIC horizontal
● PPU 240.3 BASIC vertical
● PPU 261.3 horizontal
● PPU 260.3 vertical
● PPU 281.3 horizontal
● PPU 280.3 vertical
CompactFlash card with system software and license
● For PPU 241.3 / PPU 240.3: Turning
● For PPU 241.3 / PPU 240.3: Milling
● For PPU 261.3 / PPU 260.3: Turning
● For PPU 261.3 / PPU 260.3: Milling
● For PPU 281.3 / PPU 280.3: Turning
● For PPU 281.3 / PPU 280.3: Milling
Axis extension:
● Numeric Control Extension NX10.3
Machine control panels:
● MCP 483C PN
● MCP 310C PN
Interface module
● MCP Interface PN
Mini handheld unit:
● With spiral connection cable
● With straight cable
I/O modules:
● PP 72/48D PN (digital)
● PP 72/48D 2/2A PN (analog)
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3
Components
System description
2.8 Ordering data
Article number
6FC5370-3AA30-0AA0
6FC5370-4AA30-0AA0
6FC5370-5AA30-0AA0
6FC5370-6AA30-0AA0
6FC5370-7AA30-0AA0
6FC5370-8AA30-0AA0
6FC5835-1GY40- ⃞ YA0
6FC5835-2GY40- ⃞ YA0
6FC5834-1GY40- ⃞ YA0
6FC5834-2GY40- ⃞ YA0
6FC5833-1GY40- ⃞ YA0
6FC5833-2GY40- ⃞ YA0
6SL3040-1NC00-0AA0
6FC5303-0AF22-0AA1
6FC5303-0AF23-0AA1
6FC5303-0AF03-0AA0
6FX2007-1AD03
6FX2007-1AD13
6FC5311-0AA00-0AA0
6FC5311-0AA00-1AA0
27