Table of Contents
Advertisement
Installation Manual
Ingecon® Sun Three-Phase Inverter
IIdentifying the equipment
The serial number clearly identifies the inverter. All communications with Ingeteam
S.A. should indicate this number..
Damage during transport
Should the equipment sustain damage during transport:
1) Do not install it
2) Immediately notify your distributor of this situation within a 5 day period from the
reception date.
Should it be necessary to finally return the equipment to the manufacturer, the original
packing should be used.
Separate packing waste
All packing waste can be given to an Authorised Manager for not-dangerous disposal.
Anyway, each part of the packing will be:
Wood (box, palets, corners): Authorised Manager for not-dangerous disposal..
Plastics (bag and bubble wrap): Adequated Collection Service container
Cardboard: Adequated Collection Service container.
2.2
Location
Dust free air must be provided in the enviroment of the equipment. Adequqted air quality,
temperature and humidity will be asured.
Leave at least 20 cm of clear space around the equipment to allow the free circulation of air.
The Ingecon
for a few seconds when the grid connection is made.
This routine offers a simple means of allowing the installer to check the fan operation.
It is forbidden to leave any object on the equipment
Locate the equipment in a particle free environment to prevent the ingress of
particles through the vents.
Ref.: AAS2000IKI02
Rev.:_
Dec-2009
Ingecon
®
Sun 25
Pac:
25 Kw
Uac:
3 X 400 Vac
S/N
011070411C88
Std:
Serial number
Sun Three-phase inverters are equipped with fans. These fans will rotate
®
Avda. Ciudad de la Innovación, 13
31621 Sarriguren (Navarra)
ESPAÑA
solar.energy@ingeteam.com
Tel 948 288000
Fax 948 288001
IP 54
2009
Udc:
405 - 900 Vdc
Fac:
50 Hz
015070411C88
Pg. 9 de 40
Advertisement
Table of Contents
